H3C Technologies H3C LSWM1WCM10 Access Controller Module User Manual
Page 12
5
System View: return to User View with Ctrl+Z.
[H3C]interface Bridge-Aggregation 1
[H3C-Bridge-Aggregation1]quit
# Add interfaces GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 that connect the switch and
LSWM1WCM20 to aggregate interface Bridge-Aggregation 1.
[H3C]interface GigabitEthernet 1/0/1
[H3C-GigabitEthernet1/0/1]port link-aggregation group 1
[H3C-GigabitEthernet1/0/1]quit
[H3C]interface GigabitEthernet 1/0/2
[H3C-GigabitEthernet1/0/2]port link-aggregation group 1
[H3C-GigabitEthernet1/0/2]quit
# Configure aggregate interface Bridge-Aggregation 1 as a trunk port and to permit all VLANs.
[H3C]interface Bridge-Aggregation 1
[H3C-Bridge-Aggregation1]port link-type trunk
[H3C-Bridge-Aggregation1]port trunk permit vlan all
[H3C]quit
# Configure the IP address of VLAN-interface 1 of the access controller module as 192.168.0.100/24.
[H3C] interface Vlan-interface 1
[H3C-Vlan-interface1] ip address 192.168.0.100 24
[H3C-Vlan-interface1] quit
# Configure the web username as admin, password as admin, and user level as 3, namely, administrator
level.
[H3C] local-user admin
[H3C-luser-admin] service-type telnet
[H3C-luser-admin] authorization-attribute level 3
[H3C-luser-admin] password simple admin
[H3C-luser-admin] quit
NOTE:
The device carries default web login information when delivered. You can use the default information to
log in to the web interface. The default web login information includes username admin, password
admin, and the IP address 192.168.0.100/24 of VLAN-interface 1 of the access controller module.
4.
Configure an IP address, such as 192.168.0.200/24, for the PC so that the PC can communicate
with the access controller module.
5.
On the web-based network management terminal (the PC), start the browser. In the address box of
the browser, type http://192.168.0.100 and press Enter (check that a route active between the
PC and access controller module). The browser displays the login authentication page of
web-based network management, as shown in
. Enter username admin, password admin
and the verification code, select a language (Chinese or English), and then click Login.