H3C Technologies H3C LSWM1WCM10 Access Controller Module - Manual (Page 14)

7
Figure 4 Software upgrade interface
3. Click Browse to locate the local upgrade files. After specifying the file type, you can select the
options If a file with the same name already exists, overwrite it without any prompts and Reboot
after the upgrade is finished. Click Apply.
Figure 5 Software upgrade in progress
Table 2 lists the detailed software upgrade configuration items.
Table 2 Detailed software upgrade configuration items
Item Description
File Browses for a local application program which has the extension .bin.
Filename
Sets the file name of the application program after it is uploaded to the
device. The file name must have an extension the same as that of the
application program to be uploaded.
File Type
Sets the file boot type.
Main: Main boot file for the next boot.
Backup: Backup boot file for the next boot.
If a file with the same name already
exists, overwrite it without any
prompt.
Specifies whether to overwrite a file with the same name.
If this option is not selected, when a file with the same name exists on the
device, the File already exists prompt is displayed and the upgrade
cannot begin.