H3C Technologies H3C LSWM1WCM10 Access Controller Module User Manual

Page 19

Text mode
Original mode

Figure 11 HyperTerminal window

Set HyperTerminal properties. In the HyperTerminal window, choose File > Properties from the

menu, and select the Settings tab to enter the properties setting dialog box, as shown below. Select
VT100 or Auto detect from the Emulation drop-down list, and click OK to return to the

HyperTerminal window.

Figure 12 Set the emulation type

This manual is related to the following products:

H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module