H3C Technologies H3C LSWM1WCM10 Access Controller Module - Manual (Page 22)

15
3. Connect the PC to the FTP server
After enabling the FTP service and configuring the username and password, you can enable FTP client
on the PC. In the following example, the FTP client application program is the built-in Windows XP FTP
client.
Type ftp in the DOS window:
C:\Documents and Settings\Administrator>ftp
ftp> The system prompt changed to ftp>
ftp> open 192.168.0.100 IP address of the access controller module
Connected to 192.168.0.100.
220 FTP service ready.
User (192.168.0.100:(none)): guest Username configured on the access controller
module
331 Password required for guest
Password: Enter the password 123456
230 User logged in Successfully connected to the server
4. Upgrade application files.
ftp> put main.bin main.bin Upload the upgrade file to the access controller
module
200 Port command okay.
150 Opening BINARY mode data connection for /main.bin.
226 Transfer complete.
ftp: 22554232 bytes sent in 82.25Seconds 274.22Kbytes/sec...
ftp> quit Quit FTP
221 Server closing
5. Back up application files and configuration files.
Use the following commands to maintain the access controller module. In this example, the file main.bin
on the access controller module is copied to the PC.
ftp> binary Set the transfer mode to binary
200 Type set to I.
ftp> lcd c:\temp Change the local path
Local directory now C:\temp.
ftp> get main.bin main.bin Backup to PC
200 Port command okay.
150 Opening BINARY mode data connection for /main.bin.
226 Transfer complete.
ftp: 22554232 bytes received in 21.52Seconds 1048.25Kbytes/sec.
6. Restore backup application files and configuration files.
To restore the backup files to the access controller module, do the following:
ftp> put main.bin main.bin Restore file to access controller module
200 Port command okay.
150 Opening BINARY mode data connection for /main.bin.
226 Transfer complete.
ftp: 22554232 bytes sent in 82.25Seconds 274.22Kbytes/sec.
ftp> quit Quit FTP
221 Server closing