H3C Technologies H3C LSWM1WCM10 Access Controller Module User Manual

Page 38

Load File Name :main.bin

Target File Name :main.bin

Server IP Address :192.168.0.1

Local IP Address :192.168.0.2

Gateway IP Address :192.168.0.1

FTP User Name :guest

FTP User Password :123456

Select 3 in the BootWare main menu to enter the Ethernet port submenu. Select 2 to upgrade the

main application program:

Loading...................................................................

..........................................................................

.........................Done!

22554232 bytes downloaded!

Updating File cfa0:/main.bin..............................................

..........................................................................

...........................Done!

Select 0 to return to the BootWare main menu. Select 1 in the BootWare main menu to reboot the
system.

CAUTION:
•

If the downloaded file has the same file name with an existing file in the CF card, the system prompts The
file is exist, will you recover it? [Y/N]. If you choose Y, the existing file will be replaced.

•

Make sure that sufficient space is available in the storage device. In case of insufficient space, the system
will give a prompt message.

•

The new application file directly replaces the existing file of the same type. In this example, the
downloaded file main.bin replaces the existing application file of the type M and becomes the only

main application file.

•

For more information about file types, see “

Appendix Introduction to software maintenance

.”

This manual is related to the following products:

H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module