H3C Technologies H3C LSWM1WCM10 Access Controller Module User Manual
Page 35
28
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
==========================================================================
Enter your choice(0-9): 0
Select 0 in the BootWare main menu to reboot the access controller module.
NOTE:
The name of the BootWare upgrade file depends on the device model.
Upgrading an application program through TFTP in
BootWare menu
1.
Set up a software upgrade environment.
Figure 16 Set up a software upgrade environment
Connect the management Ethernet port to a PC with a network cable. Run TFTP server on the PC, and
specify the path of the application file to be downloaded.
IMPORTANT:
The TFTP server software is not provided with the access controller module and you need to purchase and
install it yourself.
2.
Modify the Ethernet port parameters.
Select 3 in the BootWare main menu to enter the Ethernet port submenu. Then, select 5 to enter the
Ethernet port configuration submenu:
============================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
==========================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :main.bin
Target File Name :main.bin
Server IP Address :192.168.0.1
Local IP Address :192.168.0.2
Gateway IP Address :192.168.0.1
FTP User Name :