H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 82)

74
Task Command Remarks
Display log information for
event entries. display rmon eventlog [ entry-number ] [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Ethernet statistics group configuration example
Network requirements
Configure the RMON statistics group on the RMON agent in Figure 28 to gather cumulative traffic
statistics on GigabitEthernet 1/0/1.
Figure 28 Network diagram
Configuration procedure
# Configure the RMON statistics group on the RMON agent to gather cumulative statistics for
GigabitEthernet 1/0/1.
system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] rmon statistics 1 owner user1
# Display statistics collected by the RMON agent for GigabitEthernet 1/0/1.
display rmon statistics gigabitethernet 1/0/1
EtherStatsEntry 1 owned by user1-rmon is VALID.
Interface : GigabitEthernet1/0/1
etherStatsOctets : 21657 , etherStatsPkts : 307
etherStatsBroadcastPkts : 56 , etherStatsMulticastPkts : 34
etherStatsUndersizePkts : 0 , etherStatsOversizePkts : 0
etherStatsFragments : 0 , etherStatsJabbers : 0
etherStatsCRCAlignErrors : 0 , etherStatsCollisions : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 235 , 65-127 : 67 , 128-255 : 4
256-511: 1 , 512-1023: 0 , 1024-1518: 0
# Get the traffic statistics through SNMP from the terminal. (Details not shown.)