H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 46)

38
Information
channel
number
Default
channel name
Default output destination
System information received by
default
7 channel7 Not specified
Log, trap, and debugging
information
8 channel8 Not specified
Log, trap, and debugging
information
9 channel9 Log file
Log, trap, and debugging
information
Default output rules of system information
A default output rule specifies the system information source modules, information type, and severity
levels for an output destination. Table 3 shows the default output rules.
Table 3 Default output rules
Destinatio
n
System
informatio
n source
modules
Log Trap Debug
Output
switch
Severity
Output
switch
Severity
Output
switch
Severity
Console
All
supported
modules
Enabled Informational Enabled Debug Enabled Debug
Monitor
terminal
All
supported
modules
Enabled Informational Enabled Debug Enabled Debug
Log host
All
supported
modules
Enabled Informational Enabled Debug Disabled Debug
Trap buffer
All
supported
modules
N/A N/A Enabled Informational N/A N/A
Log buffer
All
supported
modules
Enabled Informational N/A N/A N/A N/A
SNMP
module
All
supported
modules
N/A N/A Enabled Informational N/A N/A
Web
interface
All
supported
modules
Enabled Debug N/A N/A N/A N/A
Log file
All
supported
modules
Enabled Debug Enabled Debug Disabled Debug