beautypg.com

Displaying and maintaining ntp – H3C Technologies H3C WX5500E Series Access Controllers User Manual

Page 31

background image

23

Configuring NTP authentication for a multicast client

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enable NTP authentication.

ntp-service authentication enable

By default, NTP authentication is
disabled.

3.

Configure an NTP
authentication key.

ntp-service authentication-keyid
keyid authentication-mode md5

[ cipher | simple ] value

By default, no NTP authentication
key is configured.
Configure the same authentication

key on the client and server.

4.

Configure the key as a trusted
key.

ntp-service reliable
authentication-keyid keyid

By default, the authentication key is
not configured as a trusted key.

Configuring NTP authentication for a multicast server

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Enable NTP authentication.

ntp-service authentication enable

By default, NTP authentication is
disabled.

3.

Configure an NTP

authentication key.

ntp-service authentication-keyid
keyid authentication-mode md5
[ cipher | simple ] value

By default, no NTP authentication
key is configured.
Configure the same authentication
key on the client and server.

4.

Configure the key as a trusted
key.

ntp-service reliable

authentication-keyid keyid

By default, the authentication key is

not configured as a trusted key.

5.

Enter VLAN interface view.

interface interface-type
interface-number

N/A

6.

Associate the specified key

with the multicast server.

ntp-service multicast-server
authentication-keyid keyid

You can associate a non-existing
key with the multicast server. To
enable NTP authentication, you

must configure the key and specify

it as a trusted key after associating
the key with the multicast server.

Displaying and maintaining NTP

Task Command

Remarks

Display information about
NTP service status.

display ntp-service status [ | { begin |
exclude | include }
regular-expression ]

Available in any view.

Display information about
NTP sessions.

display ntp-service sessions

[ verbose ] [ | { begin | exclude |
include } regular-expression ]

Available in any view.