H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 61)

53
NOTE:
Be aware of the following issues while editing file /etc/syslog.conf:
• Comments must be on a separate line and must begin with the pound sign (#).
• No redundant spaces are allowed after the file name.
• The logging facility name and the information level specified in the /etc/syslog.conf file must be
identical to those configured on the device by using the info-center loghost and info-center
source commands. Otherwise, the log information might not be output properly to the log host.
d. Display the process ID of syslogd, kill the syslogd process, and then restart syslogd by using the
–r option to make the new configuration take effect.
# ps -ae | grep syslogd
147
# kill -9 147
# syslogd -r &
Make sure that the syslogd process is started with the -r option on the Linux log host.
Now, the system can record log information into the log file.