H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 59)

50
• Stop bits—1
• Flow control—none
• Emulation—VT100
Login password loss
If you forget the login password, you can set a new password by
following these steps:
1. Select 6 from the BootWare menu to start the system without loading the
system configuration.
The following information appears:
Flag Set Success.
2. When the BootWare menu appears again, select 0 to restart the system.
System is rebooting now.
System start booting...
Booting Normal Extend BootWare....
3. Restart the wireless switch and set a new password.
system-view
[H3C]user-interface console 0
[H3C-ui-console0]authentication-mode password
[H3C-ui-console0]set authentication password simple 123456
When you set the password by using the set authentication password
{ cipher | simple } password command, follow these guidelines.
• If the cipher keyword is specified, the password is stored in cipher text.
You cannot see the password by using the display current-configuration
command.
• If the simple keyword is specified, the password is stored in plain text.
You can use the display current-configuration command to view the
password in the current configuration.