H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 57)

48
Task Command Remarks
Reboot the wireless
switch immediately.
reboot
Required
Available in user view
To schedule a reboot for the wireless switch:
Task Command Remarks
Schedule a reboot.
• Schedule a reboot to
occur at a specific time
and date:
schedule reboot at
hh:mm [ date ]
• Schedule a reboot to
occur after a delay:
schedule reboot delay
{ hh:mm | mm }
Use either command.
The scheduled reboot
function is disabled by
default.
Available in user view.
CAUTION:
•
If the main system software image file has been corrupted or does not
exist, the device cannot reboot. You must re-specify a main system
software image file, or power off the device and then power it on so the
system can reboot with the backup system software image file.
• The alert "REBOOT IN ONE MINUTE" appears one minute before the
reboot time.
• For data security, if you are performing file operations at the reboot time,
the system does not reboot.