H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 45
36
Memory Speed : 533MHz
BootWare Size : 512KB
Flash Size : 16MB
cfa0 Size : 999MB
CPLD Version : 001
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Press Ctrl + B at the prompt within four seconds to access the Boot menu.
Otherwise, the system enters the system image file reading and
self-compressing process.
NOTE:
•
To access the Boot menu, you must press Ctrl + B within four seconds at
the prompt “Press Ctrl+B to enter extended boot menu”. Otherwise, the
system enters the system image file reading and self-compressing
process.
•
To access the Boot menu after the system enters the system image file
reading and self-compressing process, restart the wireless switch.
Starting to get the main application
file--cfa0:/wx3000.bin!................
The main application file is
self-decompressing.............................
......................................................
......................................................
......................................................
.............................................Done!
System application is starting...
Startup configuration file does not exist.
User interface con0 is available.
Press ENTER to get started.