H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 50)

41
Execute the more default.diag command in user view, and then press the
Page Up and Page Down keys to view the contents of the file
default.diag.
• Display the operational statistics for each feature module of the wireless
switch. The output is omitted here.
display diagnostic-information
Save or display diagnostic information (Y=save, N=display)?
[Y/N]:n
======================================================
==========running CPU usage information============
======================================================
===== Current CPU usage info =====
CPU Usage Stat. Cycle: 57 (Second)
CPU Usage : 2%
CPU Usage Stat. Time : 2012-02-07 02:07:22
CPU Usage Stat. Tick : 0x22(CPU Tick High) 0xbd4f4ef8(CPU Tick
Low)
Actual Stat. Cycle : 0x0(CPU Tick High) 0xe4146bcb(CPU Tick
Low)
Omitted
Displaying detailed information about the
wireless switch
Use the display device verbose command to display detailed information
about the wireless switch.
• On the access controller engine
display device verbose
Slot No Board Type Status Max Ports
0 WX3010ELSW Normal -
1 WX3010ERPU Normal 2
Table 12 Command output (on the access controller engine)
Field Description
Slot No. Slot number of the access controller engine