H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 49

Comware Software, Version 5.20, Release 3308P02

reserved.

H3C WX3010E-LSW uptime is 0 week, 0 day, 0 hour, 29 minutes

H3C WX3010E-LSW

128M bytes DRAM

16M bytes Nor Flash Memory

Config Register points to Nor Flash

Hardware Version is VER.A

CPLD Version is 001

Bootrom Version is 0.07

[SubSlot 0] 8GE+2SFP+POE Hardware Version is VER.A

Displaying operational statistics for the wireless

switch

When you perform routine maintenance or the system fails, you may
need to display the operational information of each feature module for

locating failures. Generally, you need to run the display commands one

by one. To collect more information one time, you can execute the display

diagnostic-information command in any view to display or save the
operational statistics of multiple feature modules of the wireless switch.

This command displays the output of the display clock, display version,

display device, and display current-configuration commands.

•

Save the operational statistics for each feature module of the wireless
switch.

display diagnostic-information

Save or display diagnostic information (Y=save, N=display)?

[Y/N]:y

Please input the file name(*.diag)[cfa0:/default.diag]:

The file already exists, overwrite it? [Y/N]:y

Diagnostic information is outputting to cfa0:/default.diag.

Please wait...

Save successfully.

This manual is related to the following products: