Logging in through telnet, Logging in through the web interface – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 46
37
Logging in through Telnet
You can use the following default settings to log in to the web interface
through HTTP:
•
Username—admin
•
Password—admin
•
IP address of VLAN-interface 1 on the wireless
switch—192.168.0.100/24.
If you do not want to use the default login information, you can also log
in to the wireless switch by following these steps:
1.
Log in to the wireless switch through the console port, enable the Telnet
function, and set user privileges.
2.
Specify an IP address for VLAN-interface 1 of the wireless switch.
3.
Connect the PC to the Ethernet port (by default, the Ethernet port belongs
to VLAN 1) on the wireless switch.
Logging in through the web interface
You can use the following default settings to log in to the web interface
through HTTP:
•
Username—admin
•
Password—admin
•
IP address of VLAN-interface 1 on the wireless
switch—192.168.0.100/24.
If you do not want to use the default login information, you can also log
in to the wireless switch by following these steps:
1.
Log in to the wireless switch through the console port, enable the web
function, and set user privileges.
2.
Specify an IP address for VLAN-interface 1 of the wireless switch.
3.
Connect the PC to the Ethernet port (by default, the Ethernet port belongs
to VLAN 1) on the wireless switch.