H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 18)

9
NOTE:
Use electromagnetic shielding when necessary.
Lightning protection
To protect the wireless switch from lightning better, do as follows:
• Make sure the grounding cable of the chassis is well grounded.
• Make sure the grounding terminal of the AC power receptacle is well
grounded.
• Install a lightning protector at the input end of the power supply to
enhance the lightning protection capability of the power supply.
Installation tools
RJ-45 crimping
pliers
Phillips
screwdriver
Needle-nose
pliers
Wire-stripping pliers
Diagonal pliers
ESD-preventive
wrist strap
Multimeter Knife
NOTE:
No installation tool is provided with the wireless switch. Prepare them
yourself.