Displaying and maintaining blacklist and whitelist, Wlan ids configuration examples, Wlan ids configuration example – H3C Technologies H3C MSR 50 User Manual
Page 70: Network requirements
61
Step Command
Remarks
218.
Configure the lifetime for
dynamic blacklist entries.
dynamic-blacklist lifetime lifetime
Optional.
By default, the lifetime is 300
seconds.
Displaying and maintaining blacklist and whitelist
Task Command
Remarks
Display blacklist entries.
display wlan
blacklist { static | dynamic } [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display white list entries.
display wlan whitelist [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Clear dynamic blacklist entries.
reset wlan dynamic-blacklist
{ mac-address mac-address | all }
Available in user view.
WLAN IDS configuration examples
WLAN IDS configuration example
Network requirements
As shown in
, WLAN IDS allows Client 1 (MAC address 000f-e215-1515), Client 2 (MAC
address 000f-e215-1530) and Client 3 (MAC address 000f-e213-1235) to access the fat AP. Configure
the operating mode of the fat AP as hybrid to enable it to provide WLAN access services and detect
rogue clients in the network.
Figure 26 Network diagram