Displaying and maintaining wlan security, Wlan security configuration examples, Psk authentication configuration example – H3C Technologies H3C MSR 50 User Manual
Page 51: Network requirements
42
Step Command
Remarks
202.
Enter WLAN-BSS interface
view.
interface wlan-bss
interface-number
N/A
203.
Enable 802.11 key
negotiation.
port-security tx-key-type 11key
By default, 802.11 key negotiation
is not enabled.
204.
Enable the PSK and MAC port
security mode.
port-security port-mode
mac-and-psk
N/A
205.
Configure the pre-shared key. port-security preshared-key
{ pass-phrase | raw-key } key
The key is a string of 8 to 63
characters, or a 64-digit hex
number.
Displaying and maintaining WLAN security
For more information about related display commands, see Security Command Reference.
Task Command
Remarks
Display WLAN service
template information.
display wlan service-template
[ service-template-number ] [ | { begin
| exclude | include }
regular-expression ]
Available in any view.
Display MAC address
authentication information.
display mac-authentication [ interface
interface-list ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display the PSK user
information of port security.
display port-security preshared-key
user [ interface interface-type
interface-number ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
Display the configuration
information, running state and
statistics of port security.
display port-security [ interface
interface-list ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display 802.1X session
information or statistics.
display dot1x [ sessions | statistics ]
[ interface interface-list ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view.
WLAN security configuration examples
PSK authentication configuration example
Network requirements
As shown in
, perform PSK authentication with key 12345678 on the client.