beautypg.com

Configuring wlan security, Configuration task list, Enabling an authentication method – H3C Technologies H3C MSR 50 User Manual

Page 45

background image

36

802.11i IEEE Standard for Information technology—Telecommunications and information exchange

between systems—Local and metropolitan area networks—Specific requirements

Configuring WLAN security

Configuration task list

To configure WLAN security in a service template, map the service template to a radio policy, and add

radios to the radio policy. The SSID name, advertisement setting (beaconing), and encryption settings

are configured in the service template. You can configure an SSID to support any combination of WPA,

RSN, and Pre-RSN clients

Task Remarks

Enabling an authentication method

Required

Configuring the PTK lifetime

Optional

Configuring the GTK rekey method

Optional

Configuring security IE

Required

Configuring cipher suite

Required

Configuring port security

Optional

Enabling an authentication method

You can enable open system or shared key authentication or both.
To enable an authentication method:

Step Command

Remarks

155.

Enter system view.

system-view

N/A

156.

Enter WLAN service template
view.

wlan service-template
service-template-number crypto

N/A

157.

Enable the authentication
method.

authentication-method

{ open-system | shared-key }

Optional.
By default, open system
authentication is adopted.

The shared-key authentication

can be adopted only when
WEP encryption is used, and

you must configure the

authentication-method

shared-key command.

For RSN and WPA, the

authentication method must be

open system authentication.

This manual is related to the following products: