H3C Technologies H3C MSR 50 - Manual (Page 31)

22
[AP-wlan-st-1] quit
# Bind WLAN-Radio 2/0 to service template 1 and WLAN-BSS 1.
[AP] interface WLAN-Radio 2/0
[AP-WLAN-Radio2/0] radio-type dot11g
[AP-WLAN-Radio2/0] channel 1
[AP-WLAN-Radio2/0] service-template 1 interface wlan-bss 1
2. Verify the configuration:
{
The clients can associate with the APs and access the WLAN.
{
You can use the display wlan client command to view the online clients.
802.11n configuration example
The following matrix shows the feature and router compatibility:
Feature MSR 900 MSR 930 MSR 20-1X MSR 20 MSR 30 MSR 50
802.11n No
Available for
MSR 930
(WLAN &
HSPA+),
MSR 930
(WLAN &
EVDO) and
MSR 930
(WLAN).
Available for
routers with a
SIC_WLAN
module that
supports
802.11n
Available for
routers with a
SIC_WLAN
module that
supports
802.11n
Available for
routers with a
SIC_WLAN
module that
supports
802.11n
Available for
routers with a
SIC_WLAN
module that
supports
802.11n
Network requirements
As shown in Figure 8 , deploy an 802.11n network to provide high bandwidth access for multi-media
applications. The AP provides a plain-text wireless service with SSID service. 802.11gn is adopted to
inter-work with the existing 802.11g network and protect the current investment.
Figure 8 Network diagram
Configuration procedure
1. Configure the fat AP:
# Create a WLAN BSS interface.
system-view
[AP] interface wlan-bss 1
[AP-WLAN-BSS1] quit
# Configure a clear type WLAN service template with no authentication.
[AP] wlan service-template 1 clear
[AP-wlan-st-1] ssid service
[AP-wlan-st-1] authentication-method open-system
LAN Seg
m
ent