beautypg.com

Wlan access configuration task list, Specifying a country code – H3C Technologies H3C MSR 50 User Manual

Page 21

background image

12

Figure 5 Network diagram

For an AP with two radios, you can configure one radio as a workgroup bridge and configure the other

radio to provide normal access services.
As shown in

Figure 6

, Radio 1 operates as a workgroup bridge, and Radio 2 provides normal access

services. Clients associated with Radio 2 can access the network through the workgroup bridge Radio 1.

Figure 6 Dual-radio AP in workgroup bridge mode

WLAN access configuration task list

Task Description

Specifying a country code

Required.

Configuring a WLAN service template

Required.

Configuring WLAN parameters

Optional.

Configuring radio parameters

Required.

Specifying a country code

A country code identifies the country in which you want to operate radios. It determines characteristics

such as operating power level and total number of channels available for the transmission of frames. Set

the valid country code or area code before configuring an AP.
The country code for North American models cannot be modified and that for other models can be

modified at the CLI.
To specify the country code:

AP

Workgroup Bridge

LAN Segment

Hub

PC

Printer

Client

AP

Workgroup Bridge

Client

Radio 1

Radio 2

This manual is related to the following products: