H3C Technologies H3C S5830 Series Switches - Manual (Page 64)

SFP+ port LED
Each SFP+ port has a status LED to show port operating status and activities.
Table 23 SFP+ port LED description
Port LED status Description
Steady green
The port is operating at 10 Gbps. The port LED fast flashes when the port is
sending or receiving data.
Steady yellow
The port is operating at 1 Gbps. The port LED fast flashes when the port is sending
or receiving data.
Off No link is present on the port.
Management Ethernet port LEDs
Every S5830 switch has two management Ethernet port LEDs (LINK and ACT).
Table 24 Management Ethernet port LED description
LED mark Status Description
Off The management Ethernet port is not connected.
LINK
Steady green The management Ethernet port is operating at 10/100/1000 Mbps.
Off The management Ethernet port is not receiving or sending data.
ACT
Flashing yellow The management Ethernet port is sending or receiving data.
Interface card status LED
Every S5830 switch has an interface card status LED to show the status of the interface card in the
expansion interface card slot.
Table 25 Interface card status LED description
LED mark Status Description
Steady green The interface card is in position and operating properly.
Steady red The interface card has failed. Slot
Off The expansion interface card slot is empty.
58