H3C Technologies H3C S5830 Series Switches - Manual (Page 40)

Powering on the switch
Before powering on the switch, verify that:
• The power cord is properly connected.
• The input power voltage meets the requirement of the switch.
• The console cable is properly connected, the terminal or PC used for configuration has started, and
the configuration parameters have been set.
Power on the switch. During the startup process, you can access the BootWare menu to perform tasks
such as software upgrade and file management. The BootWare menu output and options differ with
software versions. For more information about BootWare menu options, see the software-matching
release notes for the device.
After the startup completes, you can access the CLI to configure the switch.
For more information about the configuration commands and CLI, see H3C S5830 Switch Series
Configuration Guides and H3C S5830 Switch Series Command References.
34