H3C Technologies H3C S5830 Series Switches - Manual (Page 62)

Transceiver
module/cable
Central
wavelength
Connector Fiber
Max transmission
distance
SFP-XG-LX-SM1310 1310 nm LC
9/125 μm
single-mode optical
fiber
10 km (6.21 miles)
10 GE SFP+ cables
LSWM1STK N/A N/A SFP+ cable 0.65 m (2.13 ft)
LSWM2STK N/A N/A SFP+ cable 1.2 m (3.94 ft)
LSWM3STK N/A N/A SFP+ cable 3 m (9.84 ft)
LSTM1STK N/A N/A SFP+ cable 5 m (16.40 ft)
LSTM2STK N/A N/A SFP+ cable 7 m (22.97 ft)
For the SFP transceiver module specifications, see H3C Low End Series Ethernet Switches Pluggable
Modules Manual.
NOTE:
•
To guarantee the functionality of the SFP ports, use only H3C SFP transceiver modules on the H3C
S5830 Switch Series.
• The SFP and SFP+ transceiver modules available for this switch series are subject to change over time.
For the most up-to-date list of SFP transceiver modules, consult your H3C sales representative or
technical support engineer.
The SFP+ cables available for the H3C S5830 Switch Series are 10 Gbps SFP+ Cu cables, as shown in
Figure 57 .
Figure 57 SFP+ cable
(1) Connector (2) Pull latch
LEDs
Table 19 LEDs at a glance
LED Availability
System status LED Entire series
10/100/1000Base-T Ethernet port LED Entire series
SFP port LED S5830-52SC
56