Appendix b frus and compatibility matrixes, Hardware compatibility matrix, Hot swappable power modules – H3C Technologies H3C S5830 Series Switches User Manual
Page 54
Appendix B FRUs and compatibility matrixes
Hardware compatibility matrix
Interface cards, power modules, and fan trays are field replaceable units (FRUs) and must be purchased
separately. When you purchase or install these FRUs, use
to verify that they are compatible with
the switch.
Table 10 FRU compatibility matrix
Card/module S5830-52SC
S5830-106S
Hot swappable power module options
LSVM1AC650 Yes
Yes
LSVM1DC650 Yes
Yes
LSVM1AC300 Yes
No
LSVM1DC300 Yes
No
Hot swappable fan tray options
LSVM152SCFAN Yes No
LSVM252SCFAN Yes No
LSVM1106SFAN No
Yes
LSVM2106SFAN No
Yes
Interface card options
LSPM2SP2P Yes
No
Hot swappable power modules
Every S5830 switch has two power module slots. You can install one power module, or for redundancy,
two power modules in
for an S5830 switch. All these power modules are hot swappable.
IMPORTANT:
H3C recommends that you use power modules of the same model on the same switch.
Table 11 Power module specifications and the compatibility with the H3C S5830 Switch Series
Power module Specifications Switch
chassis
Reference
LSVM1AC650
•
Rated input voltage range:
100 VAC to 240 VAC @ 50 Hz or 60
Hz
•
Max input voltage range:
90 VAC to 264 VAC @ 47 Hz or 63 Hz
•
Max output power:
650 W
S5830-52SC
S5830-106S
H3C LSVM1AC650 &
LSVM1DC650 Power
Modules User Manual
48