H3C Technologies H3C S5830 Series Switches - Manual (Page 21)

Figure 18 Attaching the front mounting brackets and the chassis rails to the chassis
Rack-mounting the S5830-52SC switch
Attaching the slide rails to the rack
1. Identify the rack attachment position for the slide rails.
2. Install cage nuts (user-supplied) in the mounting holes in the rack posts.
3. Align the screw holes in one slide rail with the cage nuts in the rack post on one side, and use
screws (user supplied) to fix the slide rail to the rack, as shown in Figure 19 .
4. Repeat the preceding step to attach the other slide rail to the rack post on the other side. Keep the
two slide rails at the same height so the slide rails can fix into the chassis rails.
Figure 19 Installing the slide rails
Installing the switch in the rack
This task requires two persons.
To install the switch in the rack:
15