H3C Technologies H3C S5830 Series Switches - Manual (Page 63)

LED Availability
SFP+ port LED Entire series
Management Ethernet port LEDs Entire series
Interface card status LED S5830-52SC
System status LED
The system status LED shows the operating status of the switch.
Table 20 System status LED description
LED mark Status Description
Flashing green The switch has started up properly.
Flashing red An alarm is generated. SYS
Off The switch is powered off.
10/100/1000Base-T Ethernet port LED
Each 10/100/1000Base-T auto-sensing Ethernet port has a status LED to show port operating status and
activities.
Table 21 10/100/1000Base-T auto-sensing Ethernet port LED description
Port LED status Description
Steady green
The port is operating at 1000 Mbps. The port LED fast flashes when the port is
sending or receiving data.
Steady yellow
The port is operating at 10/100 Mbps. The port LED fast flashes when the port is
sending or receiving data.
Off No link is present on the port.
SFP port LED
Each SFP port has a status LED to show port operating status and activities.
Table 22 SFP port LED description
Port LED status Description
Steady green
The port is operating at 1000 Mbps. The port LED fast flashes when the port is
sending or receiving data.
Steady yellow
The port is operating at 100 Mbps. The port LED fast flashes when the port is
sending or receiving data.
Off No link is present on the port.
57