H3C Technologies H3C S5830 Series Switches - Manual (Page 23)

Figure 21 Installing the switch in the rack (II)
IMPORTANT:
To ensure steadiness of the switch in the rack, make sure the front ends of the slide rails reach out of the
chassis rails, as shown in callout 1 in
Figure 21 .
Rack-mounting the S5830-106S switch
Attaching the slide rails to the rack
1. Identify the rack attachment position for the slide rails.
2. Install cage nuts (user-supplied) in the mounting holes in the rack posts.
3. Align the screw holes in one slide rail with the cage nuts in the rack post on one side, and use
screws (user supplied) to fix the slide rail to the rack, as shown in
Figure 22 .
4. Repeat the preceding steps to attach the other slide rail to the rack post on the other side. Keep the
two slide rails at the same height so the slide rails can fix into the chassis rails.
17