beautypg.com

Figure 53 – H3C Technologies H3C S12500-X Series Switches User Manual

Page 80

background image

72

5.

Slowly move the switching fabric module outward. Holding both sides of the switching fabric

module, pull the switching fabric module out of the slot along the slide rails, as shown in

Figure 54

.

6.

Put the removed switching fabric module on the antistatic mat.

7.

Install a new switching fabric module. For the installation procedures, see "Installing FRUs."

Figure 53 Replacing a switching fabric module (1)

(1) Loosen the captive screw

(2) Move the ejector levers outwards

See also other documents in the category H3C Technologies Routers: