H3C Technologies H3C S12500-X Series Switches - Manual (Page 145)

137
Appendix F Cabling recommendations
Routing network cables
Routing network cables for an S12510-X AC/S12510-X DC
switch
When you mount an S12510-X AC/S12510-X DC switch in a rack, route network cables through the
cable management bracket at the upper part of the front panel. Plan cable routing by using the cable
routing lines according to your installation environment and bundle the network cables at the tie-wrap
tabs. Figure 89 shows the cable management bracket on an S12510-X AC/S12510-X DC switch. Figure
90 shows how to route cables from the left side. You can route cables from the right side using the same
method. Figure 91 shows how to route cables from both sides.
Figure 89 S12510-X AC/S12510-X DC cable management bracket
(1) Cable routing line (2) Tie-wrap tab