H3C Technologies H3C S12500-X Series Switches - Manual (Page 112)

104
Table 42 CFP2 module specifications
CFP2 module
Central
wavelength
Connector Cable specifications Maximum
transmission distance
CFP2-100G-LR4
-WDM1300
Four lanes:
• 1295.56 nm
• 1300.05 nm
• 1304.58 nm
• 1309.14 nm
LC
9/125 μm single-mode
optical fiber
10 km (6.21 miles)
DC power cords
DC power cords are used for connecting the S12500-X switch to the external DC power supply system.
Table 43 describes DC power cords available for the S12510-X DC and S12516-X DC switches.
Table 43 Specifications for the DC power cords
Product code Cable length
0404A0CE 3 m (9.84 ft)
0404A0CF 10 m (32.81 ft)
AC power cords
AC power cords are used for connecting the S12500-X switch to the external AC power supply system.
• Select AC power cords according to the power of the power module.
• The connector type varies by country or region. Select a compliant connector type as needed.
• Select 16A AC power cords for the S12510-X AC switch and S12516-X AC switch. For the connector
types of different countries or regions, see Table 44 .
Table 44 16A AC power cords used in different countries or regions
1
Connector
type
Code (Length)
Countries or regions
where the type of
power cords conforms
to local safety
regulations and can be
used legally
Other countries or
regions using this type of
power cords
Countries or
regions seldom
using this type of
power cords
I type
04043396 (3
m/9.84 ft)
Mainland China N/A N/A
Connector outline Power cord outline Connector outline