Type a and type b mpu specifications, Lpus, Lpus compatible with type a mpus – H3C Technologies H3C S12500-X Series Switches User Manual
Page 101: Ea, eb, and ec. see, Table 28
93
Type A and type B MPU specifications
Table 27 Type A and type B MPU specifications
Item Description
Interfaces
•
One console port
•
One 10/100/1000BASE-T interface for management and upgrade
•
One USB port (USB2.0, host port)
Interface transmission
rate
•
Console port: 9600 bps (default) to 115200 bps
•
10/100/1000BASE-T interface: 10/100/1000 Mbps
Cables and max
transmission distance
•
Console port: 15 m (49.21 ft) over common asynchronous serial interface cable
•
10/100/1000BASE-T interface: 100 m (328.08 ft) over category-5 twisted pairs
NOTE:
The USB port on the MPU is a USB 2.0 port. This port provides connection to the USB 2.0-compliant device
only.
LPUs
You can only install the MPU and LPU that are compatible with each other.
list
LPUs that are compatible with type A MPUs and type B MPUs, respectively.
NOTE:
•
The model of a card is LSXM-prefixed on the card package and LSX-prefixed or LSXM-prefixed on the
card panel. For example, LSX1TGS48EA1 and LSXM1TGS48EA1 identify the same card. When you
order a card, refer to the card by its LSXM-prefixed model.
•
For more information about the transceiver modules that each LPU supports, see "
LPUs compatible with type A MPUs
Table 28 Type A MPU-compatible LPU specifications
LPU model
Description
Connector Port
quantity Port speed
Available transceiver
modules
LSX1TGS48EA1
48-port
10-Gigabit
SFP+ fiber
Ethernet
interface card
LC 48
10/1
Gbps
•
10-Gigabit SFP+
module
•
10-Gigabit SFP+ DAC
cable
•
Gigabit SFP module
LSXM1TGS16EA1
16-port
10-Gigabit
SFP+ fiber
Ethernet
interface card
LC 16
10/1
Gbps
•
10-Gigabit SFP+
module
•
10-Gigabit SFP+ DAC
cable
•
Gigabit SFP module