ARAG Navigator LT - Manual (Page 8)

8
7.3 Switching off
 
Fig. 15
Keep ESC key pressed until Navigator is switched off.
During switching off, Navigator automatically saves the current job:
Do NOT press any other key and do NOT disconnect the power supply
until Navigator turns off.
WARNING: ALWAYS use the special key to switch off the device;
otherwise ALL data concerning the spraying and the setup will be lost.
7.4 Use of keys for setup
SELECTION AND ACCESS TO MENU ITEMS

1A

1A

1B

1B

3

2 B
A
Fig. 16
1A Press in succession to move across the menu items (UP / DOWN).
The selected item is highlighted with a blue bar (
A).
1B Press in succession to move across the available options
(LEFT / RIGHT).
Display options (
B):
The selected item is highlighted with a blue bar.
Active option
Inactive option
2 Press to access the selected item or to confirm modification.
3 Press to exit screen without confirming modification.
ENTERING A NUMERICAL VALUE

2

2

1

1

4

3
C
Fig. 17
1 Press to move the cursor (C) across the digits
2 Press to edit the highlighted digit (increase, decrease)
3 Press to confirm.
4 Press to exit screen without confirming modification.
ENTERING TEXT

1A

1A

1B

1B

4

2
A
B
 
2 3
Fig. 18
1A Press in succession to select the character you wish to type
(UP / DOWN).
1B Press in succession to select the character you wish to type
(RIGHT / LEFT).
2 Press to:
- Confirm the selected character
- Delete the character before the cursor
(when the symbol "
" is selected)
- Save the entered text
(when the symbol "
" is selected)
3 Press to delete the character before the cursor
4 Press to exit screen without confirming modification
Legend:
imp03
Typed Name
|
Cursor Selected character Shift cursor across name
characters Caps lock Deletes the character
before the cursor Saves the entered text
SETUP