ARAG Navigator LT - Manual (Page 11)

11
SETUP "BASIC SETTINGS"
3 TRACTOR
- Upon first switching on, Navigator starts the guided setup procedure for the
Tractor : go through each step selecting the desired options (example in Fig. 25).
- When the message in Fig. 26 appears, the tractor configuration is complete. Press OK .
- Press ESC and return to the Settings menu.
Fig. 24
OK Next step
ESC Previous step
Fig. 25 Fig. 26
BASIC TRACTOR SETTINGS
• A100 : ARAG receiver code 520100.693.
• Smart-Ag / Smart 6 : ARAG receivers code 467016xx.
• NMEA : all GPS receivers with NMEA183 protocol and with the following features:
- 10 Hz GGA message; latitude and longitude coordinates with at least 6 decimal digits.
- 10 Hz VTG message.
- 0.1 Hz ZDA message.
- Serial port 57600 bps, n, 8, 1.
• Demo : Navigator simulates the driving.
• None
4 Basic setup procedure is now complete (*). Now it is possible to start the advanced setup procedure, described in chap. 10.
(*) This can be started again at any time, by selecting Start in the Implement and Tractor menu.
> > > 9 Basic settings
END 9 Basic settings
Par.
7.4
Exit the function
or data change Confirm access
or data change
Scroll
(LEFT /
RIGHT) Delete
selected
character Data
increase /
decrease Scroll
(UP /
DOWN) Enter
selected
character