3 f3 new job, New job – ARAG Navigator LT User Manual
Page 38
38
IF AT THIS STAGE YOU CHOOSE TO CONTINUE
WITHOUT SAVING (
2A
), ALL CURRENT JOB DATA
WILL BE LOST.
2B The
ESC
key stops the beginning of a new job.
3B Save the previous job with the function
Save job
(par. 12.2).
Now start from point
1 to begin a new spraying and pass directly to step 2A.
3B
Fig. 134
2A The
OK
key allows switching to the treatment start page without saving the job. Press
OK
to switch to guidance.
Fig. 135
12.3
F3
New job
Start a new spraying.
1 Press
F3
to start a new spraying. If the current job has not been saved yet, Navigator will prompt the user to save it (Fig. 133).
Press
OK
to continue without saving (
2A) or
ESC
to interrupt the procedure and save (
2B).
2b
2a
1
Fig. 133
"HOME" MENU - F3 NEW JOB
Par.
Exit the function
or data change
Confirm access
or data change
Scroll
(LEFT /
RIGHT)
Delete
selected
character
Data
increase /
decrease
Scroll
(UP /
DOWN)
Enter
selected
character