ARAG Navigator LT - Manual (Page 15)

15
ADVANCED SETTINGS "IMPLEMENT"
10.1.2 Working parameters
Set the farming machine job limits.
Fig. 47
• Sections overlapping limit
Set the acceptable threshold for overlapping of already-sprayed areas.
When this threshold is exceeded, Navigator will prompt the operator to close the relevant valves.
Fig. 48
• Perimeter overlapping limit
Set the acceptable threshold for overlapping of spraying with respect to field perimeter.
When this value is exceeded, Navigator will notify the operator that the section valves spraying outside the
field perimeter must be opened or closed.
The following conditions are required in order to use this setup:
- Drawing the field perimeter (red line in the figures) using the function F4 Surface (par. 14.3).
CONTINUES > > >
Par.
7.4
Exit the function
or data change Confirm access
or data change
Scroll
(LEFT /
RIGHT) Delete
selected
character Data
increase /
decrease Scroll
(UP /
DOWN) Enter
selected
character