1 implement, 1 sections configuration, Sections number – ARAG Navigator LT User Manual
Page 14: Section 1, Advanced settings "implement
14
The type of implement displayed depends on the selected basic settings (chap. 9), affecting which items are displayed in Fig. 41.
10.1
Implement
Fig. 41
Advanced implement settings
•
Sections configuration
(par. 10.1.1).
•
Working parameters
(par. 10.1.2).
Carried implement geometry settings
•
Geometry settings
(par. 10.1.3).
10.1.1 Sections configuration
Fig. 42
• Sections number
- Indicate the number of boom sections.
Boom
sprayer
Boom
sprayer
Boom
sprayer
Boom
sprayer
Boom
sprayer
Fig. 43
*
Fig. 44
Boom width
Fig. 45
*
The boom width value displayed in Fig. 44 will vary depending on the selected setup.
Fig. 46
• Section 1
- Indicate the width of each section.
ADVANCED SETTINGS
"IMPLEMENT"
Par.
Exit the function
or data change
Confirm access
or data change
Scroll
(LEFT /
RIGHT)
Delete
selected
character
Data
increase /
decrease
Scroll
(UP /
DOWN)
Enter
selected
character