ARAG Navigator LT - Manual (Page 27)

27
ADVANCED SETUP "USER"
10.3.4 Steering warning
Fig. 101
It allows to enable/disable the acoustic signal when the operator must steer in order to align the machine
with the following track, avoiding unsprayed or overlapping areas between the two sprays (
Steering
radius set in par. 10.1.2 Working parameters).
Signal enabled
Signal disabled
GUIDANCE
10.3.5 Offset tolerance
Fig. 102 Fig. 103
The guidance screen displays a LED bar
according to the offset with respect to the
reference line.
Each LED indicates an offset value
corresponding to the one set in item
Offset
tolerance (for ex.: 30 cm).
PREFERENCES
10.3.6 Selective job loading
Fig. 104
Fig. 105
It allows enabling/disabling the Loading options
screen (Fig. 105) when the operator loads a previously
saved job (par. 12.5
F5 Resume job ).
Screen enabled
Screen disabled
Par.
7.4
Exit the function
or data change Confirm access
or data change
Scroll
(LEFT /
RIGHT) Delete
selected
character Data
increase /
decrease Scroll
(UP /
DOWN) Enter
selected
character