8 camera, 9 tractor geometry settings, Tractor upper view – ARAG Navigator LT User Manual
Page 24: 8 camera 10.2.9 tractor geometry settings, Advanced setup "tractor, Connection point
24
ADVANCED SETUP
"TRACTOR"
10.2.8 Camera
Fig. 87
Navigator can connect to up to 2 cameras in order to monitor the working areas that the operator is unable to
see (e.g., when driving in reverse).
From the menu it is possible to enable/disable each single camera individually or both cameras:
No camera connected
1 camera connected to input no.1
1 camera connected to input no.2
2 cameras connected
10.2.9 Tractor geometry settings
Fig. 88
Enter farming machine measures:
- Press the arrow keys (UP, DOWN, LEFT, RIGHT) to move across different tractor views.
- Confirm by pressing
OK
to enter setup.
Fig. 89
Fig. 90
• Tractor upper view
- Press the arrow keys (UP, DOWN, LEFT,
RIGHT) to move across values: the description
of the selected value will appear on the display.
- Confirm by pressing
OK
to enter setup.
- Enter the value.
- Select and enter, one by one, all values.
Connection point
Fig. 91
THE CONNECTION POINT OF A
SELF-PROPELLED MACHINE
COINCIDES WITH THE REAR AXLE OF THE
VEHICLE.
Par.
Exit the function
or data change
Confirm access
or data change
Scroll
(LEFT /
RIGHT)
Delete
selected
character
Data
increase /
decrease
Scroll
(UP /
DOWN)
Enter
selected
character