ARAG Navigator LT - Manual (Page 50)

50
"JOB MENU" - F5 CAMERA
13.4
F5 Camera
Displays images from connected cameras.

1

2
Fig. 175
1 In the guidance screen, press Menu .
2 Press F5 to view the Camera menu (Fig. 176).
By connecting one or more cameras, it is possible to monitor working areas and at the same time view spraying data.
Enable camera view during advanced setup (par. 10.2.8).
 

JOB DATA
Fig. 176
F2 Switch view between the
two cameras
F7 Select job data displayed
on the LEFT side of the
screen.
F8 Select job data displayed
on the RIGHT side of the
screen.
Par.
7.4
Exit the function
or data change Confirm access
or data change
Scroll
(LEFT /
RIGHT) Delete
selected
character Data
increase /
decrease Scroll
(UP /
DOWN) Enter
selected
character