Power over ethernet (poe) adapter – Amped Wireless SR600EX - High Power Wireless-N 600mW Pro Range Extender User Manual
Page 7

SR600EX
USER’S GUIDE
6
Power over Ethernet (PoE) Adapter
a)
Power Adapter Port: Connect the included
power adapter to the PoE adapter port for
powering the Pro Smart Repeater.
b)
Repeater Port: Connect a PoE cable between
the PoE Adapter’s Repeater port and the PoE
port on
the Pro Smart Repeater to provide
power and data to the Pro Smart Repeater.
c)
LAN Port: Connects to your PC for setup or
other wired networking devices for wired network access.
d)
Reset Button: The easy to access reset button is located on the back of the PoE Adapter. Pressing
the reset button will reboot the Pro Smart Repeater. To reset the Pro Smart Repeater to default
settings, hold the reset button down for 5-10 seconds and release.
This manual is related to the following products: