Amped Wireless SR600EX - High Power Wireless-N 600mW Pro Range Extender User Manual
Page 49
SR600EX
USER’S GUIDE
48
My Pro Smart Repeater was working fine previously but now I can no longer access the Internet through the
Pro Smart Repeater.
a. The connection to your Home Network has been dropped. This can be caused by several events to
your home wireless connection. When this occurs you may rescan for another network by accessing
http://setup.ampedwireless.com
to connect to and repeat or you may try to fix the issues with your
Home Network/Hot Spot.
b. The connection to the Home Network/Hot Spot may be unstable. Move the Pro Smart Repeater
closer to the Home Network/Hot Spot and try to connect again.
c. If you cannot access the setup menu, check to see that your Pro Smart Repeater is still on. Reboot the
Pro Smart Repeater by unplugging the power adapter and plugging it back in. Check to see if your
connection has been reestablished by viewing a website. If you do not have a connection, logon to
http://setup.ampedwireless.com
and configure a new Home Network connection.
d. Check to see that your home wireless router is still on. If it has been turned off please turn it back on.
The Pro Smart Repeater should automatically reconnect to your Home Network within 10 minutes.
e. Check to see that your home wireless router settings have not changed. Any changes to the SSID,
security, or channel number from the original settings will disconnect the Pro Smart Repeater’s
connection to the home network. If you are not sure which settings have been changed, simply run
the Smart Setup Wizard again from the web menu and reconfigure your Home Network connection.