Amped Wireless SR600EX - High Power Wireless-N 600mW Pro Range Extender User Manual
Page 21

SR600EX
USER’S GUIDE
20
If the Home Network / Hot Spot connection fails, then try the following…
a. Check that the signal strength between the Pro Smart Repeater and your Home Network/Wireless
Hot Spot is above 70%. If it is not, you may need to reposition the Pro Smart Repeater.
b. Check to see that your Home Network / Hot Spot security settings are correct.
c. Check that your Home Network router’s DHCP server is enabled.
d. Try changing the channel of the Home Network router to a higher channel number (5-11) and run the
Setup Wizard again.
e. If possible, check the Internet connection for your Home Network wireless router. Connect directly to
your Home Network wireless router. If you are unable to access the internet through the Home
Network wireless router you must first fix this problem. The Pro Smart Repeater will not be able to
obtain internet access through a router that does not have internet access. Once Internet access is
restored, connect to the Pro Smart Repeater again and retry the Smart Setup Wizard.
f. Return to the Smart Setup Wizard and attempt to connect to another Home Network known to have
Internet access.
g. Try to reboot (unplug the power from the Pro Smart Repeater and plug it back in) the Pro Smart
Repeater and check to see if the connection is established (some networks may be very slow and take
longer than the allotted time for the Pro Smart Repeater to successfully connect).