Amped Wireless SR600EX - High Power Wireless-N 600mW Pro Range Extender - Manual (Page 22)

SR600EX USER’S GUIDE
21
WIRELESS SETTINGS
Home Network Settings
The Home Network Settings page allows you to adjust settings for
your Home Network connection. These settings are for adjusting the
Pro Smart Repeater after you have already gone through the Smart
Setup Wizard and wish to adjust your current configurations.
Home Network SSID: Manually enter the Identification name of the
Home Network you wish to connect to.
Channel Number: Enter the channel number of the Home Network.
If the channel number does not match, a connection will not be
established.
Channel Width: Wi-Fi operates in two separate channel widths, 20Hz and 40Hz. 20Hz allows operation on
channels 1-11, while 40Hz is 5-11. 40Hz allows for faster speeds. Select the channel width you wish to use for
your network. This setting must match that of your Home Network for a successful connection.