Amped Wireless SR600EX - High Power Wireless-N 600mW Pro Range Extender - Manual (Page 34)

SR600EX USER’S GUIDE
33
DHCP Client Range: The range of IP addresses the Pro Smart Repeater’s DHCP server will assign to users and
devices connecting to the Pro Smart Repeater.
Static DHCP: You may set a static IP address within your DHCP network. The Pro Smart Repeater will track the
device via its MAC address and assign it a pre-defined IP address each time the device logs into the network.
Auto-Load Menu: The Pro Smart Repeater automatically loads the web based Smart Setup Wizard when it
detects that there is a problem with your home network connection. To turn this feature off, disable the Auto-
Load menu feature.
Domain Name: The Domain Name allows you to change the URL which is used to access the Setup Menu for
the Pro Smart Repeater. For example, entering http://setup.ampedwireless.com into your web browser while
connected to the Pro Smart Repeater, will guide you to the Web menu for the Pro Smart Repeater. By
changing the Domain Name, you will change the URL entered to access the Web menu. If you forget the
Domain Name you entered and can no longer access the Web menu, then you will need to reset your Pro
Smart Repeater to default settings by holding down the reset button on the back panel for 5-10 seconds.