Amped Wireless SR600EX - High Power Wireless-N 600mW Pro Range Extender - Manual (Page 45)

SR600EX USER’S GUIDE
44
DEFAULT SETTINGS
The default settings for your Pro Smart Repeater are listed here. If for some reason you need to return your
Pro Smart Repeater back to default settings, hold down the Reset button on the back panel for 10 seconds.
The Pro Smart Repeater will reset back to factory settings as listed below:
IP Address: 192.168.1.240
DHCP: Auto
Web Menu Access: http://setup.ampedwireless.com
SSID: Amped_Pro_SR
Security Key (WPA/AES): wireless