Amped Wireless SR600EX - High Power Wireless-N 600mW Pro Range Extender User Manual
Page 52
SR600EX
USER’S GUIDE
51
b. The connection to the Home Network may be down. Use an Ethernet cable and connect directly to
the Pro Smart Repeater. Access
and run through the Smart Setup
Wizard again. After you have successfully reset the Home Network/Hot Spot connection, try
connecting wirelessly again.
I can no longer access the Web Menu or the Pro Smart Repeater no longer responds.
a. Connect to your Pro Smart Repeater and try to access
using your
web browser.
b. If you are advanced in networking troubleshooting, log onto your home router’s web interface. Look
for the DHCP client list and try to find the IP address of your Pro Smart Repeater assigned by your
home router. Once you have it, connect to the Pro Smart Repeater using an Ethernet cable. Open
your web browser and enter the IP address into the address bar.
c. Reset the Pro Smart Repeater back to default settings and try the Smart Setup Wizard again. To reset
the Repeater back to default settings, push the Reset Button (on the back of the PoE Adapter) down
for five to ten (5-10) seconds then let go. After the Pro Smart Repeater has fully reset, use an
Ethernet cable and connect to the Pro Smart Repeater. Login to the Web Menu at
d run through the Wizard.