Amped Wireless SR600EX - High Power Wireless-N 600mW Pro Range Extender - Manual (Page 50)

SR600EX USER’S GUIDE
49
I have a dual-band router and I cannot repeat it.
a. Log into the Web Menu for your dual-band wireless router and adjust the wireless settings. Change
the wireless band to 2.4GHz single band mode only. Disable the 5GHz wireless band.
I cannot find any wireless networks (Home Networks/Hot Spots) to repeat.
a. The Pro Smart Repeater may be out of range. Move the Pro Smart Repeater closer towards the
wireless router and try the Setup Wizard again from the Web Menu.
b. The antenna on your Pro Smart Repeater may be loose. Tighten the antenna connection and try
again.
c. The wireless Home Network/Hot Spot may not be a compatible wireless network (802.11b/g/n).
I am connected to a Home Network/Hot Spot however I do not have Internet Access
a. The Home Network/Hot Spot itself may not have Internet access. Check to see that you have internet
access by connecting directly to the Home Network first. If you are able to go online then this is not a
problem. If you cannot go online, then the Home Network’s Internet connection must first be
resolved.