Amped Wireless SR600EX - High Power Wireless-N 600mW Pro Range Extender - Manual (Page 53)

SR600EX USER’S GUIDE
52
The connection to the Home Network/Hot Spot seems slow. File transfers take a long time to transfer.
a. The Pro Smart Repeater may be too far away from your Home Network/Hot Spot. The closer the Pro
Smart Repeater is to your Home Network/Hot Spot, the better its connection will be. The Pro Smart
Repeater must have a strong signal (70% or greater) in order to repeat the signal with fast speeds and
further range. Move the Pro Smart Repeater closer to your Home Network/Hot Spot and try again.
You may also try turning the Pro Smart Repeater around so the back is facing the Hot Spot and try
again.
b. You may be downloading from the Internet and not within your Home Network or Extended Network.
Files transferred through the Internet are limited by your ISP speed and the data download speeds
from the website that you are downloading from.
c. Your computer may be using an older Wi-Fi adapter with lower speed limits (802.11b/g)
The range from the Pro Smart Repeater seems low
a. Check to see that your wireless output settings are at 100%. Go to the Web Menu, Wireless Settings
and check the Advanced Settings. Make sure the output power is at 100%
b. Your Pro Smart Repeater may be installed in a poor location. Avoid setting up your Pro Smart
Repeater in areas with high interference, such as, near fridges, microwaves, metallic objects and low
surfaces. Install the Pro Smart Repeater in a higher location if possible.